Moduly
	Configuration_of_CMSIS

	Device_Peripheral_Registers

Výčty
enum	IRQn_Type { Reset_IRQn = -15, NonMaskableInt_IRQn = -14, HardFault_IRQn = -13, SVCall_IRQn = -5, DebugMonitor_IRQn = -4, PendSV_IRQn = -2, SysTick_IRQn = -1, FLEX_INT0_IRQn = 0, FLEX_INT1_IRQn = 1, FLEX_INT2_IRQn = 2, FLEX_INT3_IRQn = 3, FLEX_INT4_IRQn = 4, FLEX_INT5_IRQn = 5, FLEX_INT6_IRQn = 6, FLEX_INT7_IRQn = 7, GINT0_IRQn = 8, GINT1_IRQn = 9, Reserved0_IRQn = 10, Reserved1_IRQn = 11, Reserved2_IRQn = 12, Reserved3_IRQn = 13, SSP1_IRQn = 14, I2C_IRQn = 15, TIMER_16_0_IRQn = 16, TIMER_16_1_IRQn = 17, TIMER_32_0_IRQn = 18, TIMER_32_1_IRQn = 19, SSP0_IRQn = 20, UART_IRQn = 21, USB_IRQn = 22, USB_FIQn = 23, ADC_IRQn = 24, WDT_IRQn = 25, BOD_IRQn = 26, FMC_IRQn = 27, Reserved4_IRQn = 28, Reserved5_IRQn = 29, USBWakeup_IRQn = 30, Reserved6_IRQn = 31 }

Detailní popis

Dokumentace výčtových typů

Hodnoty výčtu
Reset_IRQn	1 Reset Vector, invoked on Power up and warm reset
NonMaskableInt_IRQn	2 Non maskable Interrupt, cannot be stopped or preempted
HardFault_IRQn	3 Hard Fault, all classes of Fault
SVCall_IRQn	11 System Service Call via SVC instruction
DebugMonitor_IRQn	12 Debug Monitor
PendSV_IRQn	14 Pendable request for system service
SysTick_IRQn	15 System Tick Timer
FLEX_INT0_IRQn	All I/O pins can be routed to below 8 interrupts.
GINT0_IRQn	Grouped Interrupt 0
GINT1_IRQn	Grouped Interrupt 1
Reserved0_IRQn	Reserved Interrupt
SSP1_IRQn	SSP1 Interrupt
I2C_IRQn	I2C Interrupt
TIMER_16_0_IRQn	16-bit Timer0 Interrupt
TIMER_16_1_IRQn	16-bit Timer1 Interrupt
TIMER_32_0_IRQn	32-bit Timer0 Interrupt
TIMER_32_1_IRQn	32-bit Timer1 Interrupt
SSP0_IRQn	SSP0 Interrupt
UART_IRQn	UART Interrupt
USB_IRQn	USB IRQ Interrupt
USB_FIQn	USB FIQ Interrupt
ADC_IRQn	A/D Converter Interrupt
WDT_IRQn	Watchdog timer Interrupt
BOD_IRQn	Brown Out Detect(BOD) Interrupt
FMC_IRQn	Flash Memory Controller Interrupt
Reserved4_IRQn	Reserved Interrupt
Reserved5_IRQn	Reserved Interrupt
USBWakeup_IRQn	USB wakeup Interrupt
Reserved6_IRQn	Reserved Interrupt